0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2024-10-24 18:02:36
615
59
Report

Hueforge Jack Skellington

@Quini_5681569
Message
Follow
Recommended printing method
Description

Project: Jack.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm


 The Model is 140x242.71mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 3mm and the Actual Depth is 2.2mm


Filaments Used:

PETG JAYO Black Transmission Distance: 0.3

PLA BambuLab Basic Brown Transmission Distance: 2

PETG JAYO White Transmission Distance: 6

PLA BambuLab Basic Blue Gray Transmission Distance: 3

This print uses 4 unique filaments


!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!


Swap Instructions:

Start with Black

At layer #7 (0.64mm) swap to Brown

At layer #10 (0.88mm) swap to White

At layer #25 (2.08mm) swap to Blue Gray for the rest.

Tags
hueforge
hallowen
terror
jack skellington
License