Hueforge Mad Max

Mad Max Hueforge

Printed in 4 colors.

The photos are of my 3D print.

!!! Attention: The image can be scaled, but afterwards the height (Z) must be set back to 100%, otherwise the colors will not be correct. !!!

Layer height: 0.08 mm, First layer 0.16 mm, 1 Wall, 100% infill

Sunlu PLA Matte Black, TD: 0.1 mm

Sunlu PLA Matte Red, TD: 3.0 mm

Sunlu PLA+ Bright Yellow, TD: 7.0 mm

Elegoo PLA+ White, TD: 5.4 mm

Layer height: 0.08 mm, First layer 0.16 mm

Start with black

Layer 7 (0.64 mm) switch to red

Layer 12 (1.04 mm) switch to yellow

Layer 17 (1.44 mm) switch to white until the end