Hulk Hogan Hueforge

Project: Hulk Hogan.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 235x235mm in size

 You may print at higher layer heights below the Base Thickness of 0.48mm

 The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Jade White Transmission Distance: 5

PLA BambuLab Basic Red Transmission Distance: 4

PLA BambuLab Basic Yellow Transmission Distance: 5.5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to Jade White

At layer #13 (1.12mm) swap to Red

At layer #21 (1.76mm) swap to Jade White

At layer #24 (2mm) swap to Yellow for the rest.