0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2026-01-04 09:13:33
789
10
Report

I30 Rear Fin Diffuser

@TonyNguyen_456929
Message
Follow
Recommended printing method
Description

I design these Rear Fin Diffuser for the 2021 Hyundai i30 N Line back in early 2025 (I didn't use a scanner but its pretty spot on), pretty sure they would fit earlier model N also as long as the rear bumper is the same. In the photos they are friction held onto the car but I recommend getting 20x20 L brackets from a hardware store to secure each fin. The side Fin (black & orange fin in the photos) bolts on using the bumper bolts mount. In the photos I skinned them with fiberglass but if you have a good printer then you can print it in a better & stronger material than PLA. The Rear Single Fins are 3mm & 8mm thickness, mine is 3mm PLA with 2xlayers of fiberglass & I included STEP files so you can add or redesign it to your liking using Fusion3d.

Tags
i30
Hyundai
N
NLine
N Line
Hyundai I30
i30N
i30 NLine
License