IKEA SPARTANSK Water Bottle V2 "SPACE"

Give your IKEA SPARTANSK glass water bottle a unique, protective, and colorful upgrade with this custom 3D-printed shell! This design completely encases the glass bottle, offering protection from bumps and scratches while adding a comfortable grip and a personalized look.

Unlike previous versions, this V2 model requires NO screws or bolts. The entire main body prints in one piece, and the assembly is secured simply by a threaded bottom cap that can be tightened with a coin.

SPARTANSK borraccia, vetro trasparente/verde, 0.5 l - IKEA Italia

10 - Countersunk Screws (M3x8)

Key Features:

• Full Protection: Encases the glass body to reduce the risk of breakage.
• Screw-less Assembly: Smart design uses a threaded bottom cap instead of metal hardware.
• Easy to Print: Designed for standard FDM printing with minimal support requirements.
• Customizable: Print in different colors or materials (PLA, PETG, etc.) to match your style.
• Secure Fit: Internal padding ensures the bottle sits snugly without rattling.

Hardware / Materials Required:

• IKEA SPARTANSK Bottle: The glass bottle itself.
• Double-sided Tape: A small piece to secure the top cap cover.
• Soft Adhesive Foam/Sheet (EVA or Neoprene): A small cutout is needed for the bottom cap to cushion the glass and ensure a tight, rattle-free fit.

Print Information:

• Material: PLA or PETG (PETG recommended for durability and impact resistance).
• Layer Height: 0.2mm standard.
• Infill: 15-20% gyroid or cubic for strength.
• Supports: Minimal supports may be needed depending on your printer's bridging capabilities (check slicer preview).

Assembly Instructions:

1. Prepare the Bottom Cap: Cut a circle of soft adhesive foam (EVA/Neoprene) and stick it to the inside of the printed bottom threaded disc. This cushions the glass.
2. Insert the Bottle: Slide the IKEA SPARTANSK bottle into the main printed body from the bottom.
3. Secure the Bottom: Screw the threaded disc into the bottom of the shell. Use a coin in the slot to tighten it securely.
4. Attach Top Cap: Apply a small piece of double-sided tape to the original bottle cap and press the printed top cover onto it.