IKEA Skådis Cable Holder / Hook

A clean, ergonomic, and sturdy cable holder specifically designed for the IKEA Skådis pegboard system.

The curved cradle design prevents sharp bends and long-term strain on your cables, making it ideal for USB-C, Lightning, power leads, headphones, and setup wiring.

🛠 Recommended Print Settings

• Orientation: Print on its side for maximum layer strength along the hooks.
• Infill: At least 30% (Gyroid or Grid recommended for optimal structural rigidity).
• Wall Loops / Perimeter: 3 walls minimum for extra hook durability.
• Supports: Yes, required for overhangs. Enable Normal (Auto) or Tree Supports touching the build plate only.
• Layer Height: 0.20 mm or 0.16 mm for smooth curves.
• Material: PLA, PETG, or ABS (PETG recommended for flexibility and long-term durability).

📦 Features

• Custom Fit: Locks securely into standard IKEA Skådis slots.
• Cable Friendly: Smooth, rounded support surface eliminates tight bends.
• Clean Aesthetic: Sleek, minimalist design matching your desk setup.

If you like this design, please consider leaving a like, posting a make, or sharing your setup! Happy printing!