2025-10-31 16:38:14
680
19
IKEA caster wheel stopper
@Rofedex_4811647
Donate
Message
Follow
Recommended printing method
Add
Kobra S1 PLA 0.2mm Layer 5% Infill
Kobra S1
Kobra 3
、
Kobra 2
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 29m
3
Share
Description
This part is designed to block the rolling motion of IKEA caster wheels — specifically the TINGBY table casters, though it should fit other IKEA models with 50 mm wheel diameter.
The blocker works by:
- Jamming between the two wheels to create friction that stops movement.
- Using front and rear wedges to prevent the wheels from rotating.
It’s a non-load-bearing part, meaning the caster still contacts the ground and supports the full weight. As a result, lightweight prints are sufficient — 5% infill has proven sturdy enough to hold a Kobra S1 printer + Ace Pro on the table without issues.
Print Settings
- Standard settings
- Infill: 10% (or 5% is still fine for light-duty use)
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
Comments & Ratings
Here is empty
Remixes
