Impossible Super Twisty Passthrough

My Impossible Super Twisty Passthrough is the super twisty take on the popular passthrough type, and it's the one I reach for when I want a fidget that's genuinely addicting and ultra fun to play with. A nice color scheme makes a real difference here, since the twisting motion is what shows the design off best.

Print settings:

• Infill: higher for the inner part so it goes through faster, at +30%
• Perimeters/Wall Loops: 2
• Filament: PLA or PETG
• Support/Brim/Raft: NO
• XY Size Compensation: -0.35 for the inner piece only, in Prusa Slicer under Print Settings, then Advanced Settings (this replaces the older -0.2 value)
• Listed profile: 2 plates in 4 hours 57 minutes 3 seconds, with infill changed to 23.5% and other settings adjusted for the best results

Tips:

• Tolerance is the catch: the inner piece has to slide through cleanly, so do not rush the setup, and check the fit before you commit to a long print.

My Patreon page is still available at patreon.com/MasterPrinter, but I do not actively update it anymore.

You may also like:

• Reverse Twist Passthrough Set (3) https://www.makeronline.com/en/model/Reverse%20Twist%20Passthrough%20Set%20(3)/181114.html
• Valentines Heart Passthrough https://www.makeronline.com/en/model/Valentines%20Heart%20Passthrough/151099.html
• Christmas Tree Passthrough https://www.makeronline.com/en/model/Christmas%20Tree%20Passthrough/118890.html
• Nature Leaf Passthrough (Single Extruder/Multi Color) https://www.makeronline.com/en/model/Nature%20Leaf%20Passthrough%20(Single%20Extruder%2FMulti%20Color)/137734.html
• Super Fidget Hexagon Twist https://www.makeronline.com/en/model/Super%20Fidget%20Hexagon%20Twist/156358.html