🚀 Interactive "AURA" Button

Bring your internet points to life! Whether you just made an incredibly smooth move (+100 Aura) or fumbled the social interaction entirely (-900 Aura), this mechanical clicky button is the perfect desk toy to measure your daily vibe.

Optimized for multi-color printing (AMS/ACE compatible) with virtually zero waste if printed with the recommended settings!

🛠️ Assembly Instructions (Super Easy!)

This model is designed to be simple, but it requires one small step for maximum durability:

1. Insert the Spring: Place the printed spring into the base slot.
2. Glue the Cap: Apply a tiny drop of Superglue (Cyanoacrylate) to the top flat bar of the spring.
3. Attach the Button: Align the keycap over the spring and press down firmly for a few seconds. Using glue ensures the button won't fly off during your most intense clicking sessions!

🖨️ Recommended Print Settings

To get the best mechanical resistance and avoid color bleeding, please use these settings:

1. The Spring (Crucial for durability!)

• Orientation: Print FLAT on its side (do NOT print it standing up).
• Infill: 100% (Rectilinear or Aligned).
• Wall Loops: 4 or 5 walls (this makes the curved arm solid and extremely elastic).
• Material: PLA works great, but PETG will give it an even longer lifespan.

2. The Keycap (Textured face-down)

• Orientation: Print FACE-DOWN (the text should touch the build plate).
• Layer Height: 0.20 mm (with a text depth of 0.4mm, the printer will only change colors for the first 2 layers, reducing filament waste to almost zero!).
• Elephant Foot Compensation: Set to 0.15 mm - 0.20 mm to keep the letters perfectly sharp and avoid bleeding.
• Plate: Textured PEI plate highly recommended for that professional, rugged finish!

3. The Base

• Orientation: Default.
• Infill: 15% - 20% (Gyroid or Grid).
• Supports: None needed! The text is engraved, so it prints flawlessly.

🎨 Multi-color & Filament Saving Tip:

If you are printing the "-900 AURA" version with a red text on a black button, reduce your Flushing Volumes (Black ➡️ Red) in your slicer to around 100 mm³. Black covers easily, and this will shrink your purge tower, saving you precious filament!

Loved the model? Don't forget to upload your print profile and share your make! 💬