Japanese Autumn Temple (Hueforge)

Project: Japanese Temple.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 200x200mm in size

 You may print at higher layer heights below the Min Depth of 0.24mm

 The Max Depth is 2mm and the Actual Depth is 1.9mm

Filaments Used:

PLA Overture Matte Jeans Red Transmission Distance: 0.4

PLA Overture Matte Carbon Fiber Black Transmission Distance: 1.1

PLA Protopasta Spittin' Seeds Gray Transmission Distance: 16

PLA Prusament Pristine White Transmission Distance: 5.1

This print uses 4 unique filaments

Swap Instructions:

Start with Jeans Red

At layer #8 (0.72mm) swap to Carbon Fiber Black

At layer #12 (1.04mm) swap to Spittin' Seeds Gray

At layer #19 (1.6mm) swap to Pristine White for the rest.