JetKVM 10-inch rack mount - With Keystone slots

A 10-inch rack mount for the JetKVM. I made this model in 3 variants. For 1, 2 or 3 JetKVMs. Each variant also has versions with keystone slots.

A huge shout-out to JaredC01 for the original mount, which I used as a base for mine.  His files are available here.

This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here.

Do you like my models? Consider buying me a coffee ;)

Updates

• 08 Apr. 2025: I've included a version with 4 keystone slots in the 2x JetKVM mount.
• 22 Feb. 2025: I've included a version with 4 keystone slots in the 3x JetKVM mount.

Required parts

• 2x M2x12mm screws per JetKVM.

Assembly instructions

• Remove the two M2 screws from the top of your JetKVM.
• Insert the JetKVM into the mount, and align the screw holes from the mount with the screw holes from the KVM.
• Insert the 2x M2x12 screws and tighten them.

Print Settings

Rafts:

Doesn't Matter.

Supports:

No.

Walls/Perimeters:

3 or more.

Resolution:

0.2 or 0.24

Infill:

20% or more.

Filament:

Any.