Jujutsu Kaisen Hueforge - Satoru Gojo

Donate

Message

Recommended printing method

Print Profile Files (1)

Raw Model Files (1)

Add

Designer

/ Plates:1

/ 9h1m

Description

Ce modèle s'inspire du personnage Satoru Gojo de l'anime Jujutsu Kaisen, capturant son allure iconique et son charisme unique.

Parfait pour les collectionneurs et les fans de l'anime. Cet objet sert de pièce d'exposition exceptionnelle pour toute étagère, bureau ou vitrine.

Le modèle est imprimé en une seule pièce, éliminant ainsi le besoin d'assemblage supplémentaire.

Suggestions d'impression

Project: Gojo Japan.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 182.07x235mm in size

You may print at higher layer heights below the Base Thickness of 1.28mm

The Max allowed Thickness is 3.2mm and the Actual Thickness is 3.2mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Jade White Transmission Distance: 5

PLA BambuLab Basic Red Transmission Distance: 4

PLA BambuLab Basic Yellow Transmission Distance: 5.5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #17 (1.44mm) swap to Jade White

At layer #20 (1.68mm) swap to Black

At layer #21 (1.76mm) swap to Red

At layer #25 (2.08mm) swap to Black

At layer #26 (2.16mm) swap to Jade White

At layer #27 (2.24mm) swap to Red

At layer #29 (2.4mm) swap to Jade White

At layer #30 (2.48mm) swap to Yellow

At layer #32 (2.64mm) swap to Jade White for the rest.