0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2026-02-09 23:14:04
1.1k
31
Report

K3 Max Infill/Wall Overlap Test

@Ninjecky_3613101
Message
Follow
Recommended printing method
Description

Print time- 19 min

Material usage- 5.5 grams

This model is designed to test if you should change the infill to wall overlap value when trying to correct a model that is printing with a gap between the walls and the rest of the surfaces. There are two fields that will affect the model in different ways. This will test both. I made this at a specific layer height that would print a few layers of infill and a few layers each of top and bottom shells.

Tob/Bottom Solid infill wall overlap- The horizontal top and bottom surfaces will be overlapping the vertical walls for better bonding and to minimize the appearance of pinholes. 25-30% is a good starting point. Water-tight vessels require at least 50%

Infill/wall overlap- The infill is area is increased slightly to overlap with all adjacent walls to the infill area. This is to increase strength and stability. Too high of a value can create upward pillowing effect, requiring more top surface layers to be needed. Best to start this value at 10-15%.

License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.