Karate Figure - Stylised Martial Artist

Karate Character - Decorative Figure

A stylized martial-arts character with a moustache, tied belt and curled forelock. A small decorative figurine, with the character and feet in one connected mesh. This listing does not claim affiliation with a franchise or sports brand.

FILES AND SIZE

Prepared size: 36.53 x 75.19 x 100.00 mm (X x Y x Z), with a chosen height of 100 mm. This is a preparation scale, not a measured physical print or a verified historical size: the source STL did not declare units. Uniform resizing is possible; fine details become thinner when reduced.

Includes STL and a geometry-only 3MF in millimetres. The 3MF is not a tested printer profile. There are no colour assignments; teal in the images is a display colour. The original Cults file is preserved separately in the owner archive.

PRINTING STATUS

Digital render images of the actual supplied mesh. No physical print is verified for this package. The model was checked digitally for closed mesh, face orientation and self-intersections; digital checks do not establish successful printing.

For a first FDM evaluation, upright orientation, PLA, a 0.4 mm nozzle, 0.20 mm layers, 3 walls and supports under overhangs are a starting point, not validated print settings. Review the sliced preview, adhesion, support contacts and delicate details on your own machine. Do not use vase mode. Resin requires its own orientation, support and curing validation.

LICENCE

Personal, non-commercial use only. No resale or redistribution of the digital files. This is a non-exclusive publication.

AI DISCLOSURE

AI-assisted preparation of an existing Santurtzi3D catalogue model. The owner reports AI use, mainly Tripo or MakerWorld, for much of the historical catalogue; the original generator is not documented per file. Mesh inspection, scale preparation and listing text were assisted by AI. Renders were computed directly from the actual mesh, not generated as photographs.