2024-12-15 20:48:43
4k
374
Kobra 3 poop filament bin holder - customizable
@MotoDragon_2175172
Donate
Message
Follow
Recommended printing method
Add
PLA, 15% infill
Kobra 3
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 48m 36s
60
Share
Description
This is a support for poopie/purge bins.
My printer sits on a cabinet and the purge bin has no more space on it.
I designed this support to fit right into the aluminium frame so it won't fall out.
I printed it on the side so the layer are longitudinal with 15% infill, from PLA.
The attached STL is for this bin: https://www.makeronline.com/en/model/kobra3%20Party%20Pooper%20filament%20catch%20bin%20system/16770.html
Attached is the openScad file as well. Feel free to adjust the length and the width. I think 15 mm is enough for the width.
If you modify the inside length them I would recomend to print a 1-2 mm thick one as test to make sure the bin fits properly.
Tags
License
