I had a lot of requests to make a rear cover for the Kobra S1. While making this, I was seeing some users having trouble with the plastic tabs, both on the front and rear of the OEM and 3D-printed ones. I thought of a way to eliminate this by adding magnets.
The magnet's width is 4mm wide and 2 mm thick. I will provide a link to the magnets I purchased from Amazon. They are cheap, strong, and come in a pack of 400 (4 different sizes, 100 each). While mounting the magnets, please take note of the orientation so you don't find yourself printing multiple. I also recommend adding a small dab of CA glue to fully secure the magnets in place. I used a Q-tip and dabbed the inside of the hole and then inserted magnets.
WARNING!!! I ABSOLUTELY RECOMMEND PRINTING THE REAR COVER IN PETG DUE TO THE TEMPS IT IS AROUND.
I have printed the front cover in PLA before and have had no issues with any warping. In this photo, both the front and rear are printed in PETG-CF.
Please let me know of any issues with this, and I will try to fix them as fast as possible. Please make sure "Detect Thin Wall" and supports are used.
Amazon Link - https://www.amazon.com/dp/B0CDLF9K2Z?ref=ppx_pop_mob_ap_share&th=1
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.

