Kobra S1 MAX Side mount with Multiboard v9
New & Upgraded Kobra S1 Max Side Mount, utilizing the multiboard hanging system
For the RIGHT side of the printer
With the utilization of the multiboard system, you can hang even heavy items without loosing friction
Multiboard is a free community modular building system.
You can find various designs for holders, boards, bins, drawers etc
For more info check official site: https://multibuild.io
Designed for printers using engineer or high temps filaments or the heating chamber
Recommended ASA, works fine with PLA or PETG
What changed with this version:
Re-designed, upgraded, structural modifications
Extra Rigid, extra strong
Snug Fit
NEW Clamp
NEW Joining System (dovetail)
258 gr material used, a 15 hour print
Optimal settings included in file
Supports needed
Designed specifically for Kobra S1 MAX.
Tested and works flawlessly
Hardware used
8x M3 Torx length 11mm
3x M3 Torx length 23mm (for joining RB and RR)
4x magnets 10x3mm
Installation Instructions
Glue Magnets (see recommended positions in photo)
Place both dovetail to the RF part, aligning the holes. There is an "L" sign in one end,
Apply the 2 M3x11mm screws
Slide in RB part and screw the other 2 M3x11mm screws
Place part RR to position. Don't screw anything yet
Remove printer screws
Place joined construction and press RR part to fit. It's a snug fit but won't break (if original settings used)
Screw the remaining 4 M3x11mm screws in the printer holes
Screw 3 M3x23mm screws that's joining the RB part with the clamp RR (rear part)
DOESN'T interfere with the operation of the door or the printer
TESTED and WORKS without any issue
REMAINS in place during printing
https://drive.google.com/file/d/1xbV0FP6bIyIduJsL9nhSYHu7RPy37Uu7/view?usp=drive_link
Some holders of my design:
IPA and Buildplate Cleaner Holder
Debouring tool Holder
Tweezers Holder
Scraper (Spatula) Holder
Screwdriver Holder
Cutter, Scissors, Needle-nose Plier Holder
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
