Kobra S1 MAX Side mount with Multiboard v7
A side mount for the Kobra S1 Max, utilizing the multiboard hanging system
The mount uses 5 screws and magnets (optional)
With the utilization of the multiboard system, you can hang even heavy items without loosing friction
Multiboard is a free community modular building system.
You can find various designs for holders, boards, bins, drawers etc
For more info check official site: https://multibuild.io
Recommended PETG, works fine with PLA
For printers printing ONLY PETG or PLA.
Not recommended for high temps or chamber heater usage.
For high temps, please use version 9
Supports needed
250 gr material used, a 10 hour print
Optimal settings included in file
Designed specifically for Kobra S1 MAX.
Tested and works flawlessly
Hardware used
3x M3 Torx length 11mm
2x M3 Torx length 23mm
3x magnets 10x3mm
DOESN'T interfere with the operation of the door or the printer
TESTED and WORKS without any issue
REMAINS in place during printing
https://drive.google.com/file/d/1xbV0FP6bIyIduJsL9nhSYHu7RPy37Uu7/view?usp=drive_link
21/07/2026 VERSION 9
High Temps Profile
Re-design, Structural Mods
NEW Clamp
NEW Joiner (Dovetail)
Rigid, Snug and Extra Strong
Recommended ASA, can be printed with PETG or PLA
Some holders of my design:
IPA and Buildplate Cleaner Holder
Debouring tool Holder
Tweezers Holder
Scraper (Spatula) Holder
Screwdriver Holder
Cutter, Scissors, Needle-nose Plier Holder
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
