2025-07-27 04:05:16
12.9k
1.5k
Kobra S1 Poop Bin / Waste Bin Medium Capacity
@Anselor_3041911
Donate
Message
Follow
Recommended printing method
Add
PETG
Kobra S1
Kobra S1 Max
、
Kobra 3
、
Kobra 2
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 4h18m
241
Share
Description
Medium capacity poop bin.
Uses 3D geometry to allow for thin walls that maintain their shape allowing for less material and faster print time.
Instructions
Slightly loosen the two screws on either side of the poop chute opening.
Slide the attachment plate over the screws and then tighten them back down.
Line up the right side of the attachment over the plate at a slight angle, straighten, then let it fall down in place.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
