2026-02-08 03:55:21
4.9k
130
Kobra S1 Printhead Poop Bin
@bunandant_1336501
Donate
Message
Follow
Recommended printing method
Add
Kobra S1 Print Head Poop Bin
Kobra S1
Kobra 3
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
/ Plates:2
/ 12h37m
41
Share
Description
I thought it would be cool to have a poop bin that looked like the Kobra S1's printhead. For simplicity's sake, I decided to use a french cleat mounting system. Print the cleats first and attach them to the back of the printer using the two screws on either side of the poop chute. The top back edge of the poop bin is a 45 degree angle to hang on the cleats. It partially blocks the airflow for the exhaust so I drilled some holes in a clear acrylic dome I had laying around to allow airflow. I'm sure someone will remix a voronoi version of it if you're concerned about airflow, I'm just not skilled enough to do that. Thanks and happy printing!
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
