0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2026-05-27 18:28:10
647
31
Report

LITHOPHANE LAMP "STAR WARS"

@smolszy_4372775
Message
Follow
Description

LITHOPHANE LAMP "STAR WARS"


DESCRIPTION:


A lamp for a STAR WARS fan. Made for my brother-in-law, who is a huge fan of the series. You can use other photos depending on your preferences. The lamp is powered by 230V. I used a 12V power supply and a 3V motor to achieve a low rotation speed. You can also adjust the rotation speed with a PWM controller.


If you want to generate your own lithophane photos, visit


https://tool.itslitho.com/UploadImg


Prepare a clear photo in a 1:1 aspect ratio. The photo should fit the lamp size: 100mm x 100mm. Thickness: 4mm


PART LIST:


E14 LED BULB e.g.


https://www.ledvance.com/en-int/professional-lighting/products/lamps/led-lamps/ledvance-led-lamps/led-lamps-with-filament-style-led-technology/led-lamps--classic-mini-ball-shape-c251519?productId=349188


e14 BULB SOCKET


https://pl.aliexpress.com/item/1005006722145866.html


3.3V 1.2A 4W POWER SUPPLY MODULE


https://pl.aliexpress.com/item/1005009020287447.html


POWER CORD WITH SWITCH


https://pl.aliexpress.com/item/32921672432.html


PWM MOTOR SPEED CONTROLLER 2A 1.8-12V


https://pl.aliexpress.com/item/1005006592430892.html


12V 60 RPM GEARBOX MOTOR


https://pl.aliexpress.com/item/1005006785073459.html


608RS BEARING


https://pl.aliexpress.com/item/1005009072070935.html


ASSEMBLY:


Print all the elements. It's best to print lithophan photos using the provided profile. Remember that lithophan photos print very slowly. I used a 0.1mm layer height. Each photo took about 8 hours to print. Lithophan looks best printed with white PLA. The lamp emits a pleasant, warm light, despite the neutral white bulb. Print the remaining elements according to your taste. I printed with SUNLU PLA+ silver silk filament.


Some elements need to be glued in the areas marked in blue in the INSTALLATION image. Elements 7 and 8 are very tightly assembled. You need to press them firmly together. The easiest way to attach the images is to first glue the four side images, then the top one. Do not use too much glue to prevent it from seeping out. The bulb socket should be glued to element 7, remembering to first connect the wires and thread them through the hole. The motor gear and bearing don't need to be glued, but I did. I compensated for any minor slack in the components this way. For gluing, use epoxy glue, which reacts very well with PLA. To secure the base, use M3 16mm screws.


I didn't create a wiring diagram. However, the connections are very simple, as all modules have descriptions. There are also photos in the documentation. Connect the power cable to the power supply. Connect the wires from the E14 socket to the power cable. DO NOT WORK WITH THE POWER SUPPLY CONNECTED!!! Connect the + and - wires from the power supply to the controller. Connect the wires from the controller to the motor. Remember to observe the correct + and - polarity. Place the controller knob in the side hole of the lamp base.


The magnets shown in the photos turned out to be unnecessary. They aren't included in this model because the lampshade is heavy enough to hold it securely.


If you've done everything correctly, you'll get the effect shown in the photos and video. Good luck :)


SUMMARY:


I hope that assembling the lamp won't be a problem for you, and that the descriptions provided will be helpful. If you're happy with my project and want to show your appreciation, I encourage you to support me. This will encourage me to continue working on it and help me achieve my goals.


Thank you, and I encourage you to try my project.


https://buymeacoffee.com/smol.szy

Tags
STAR WARS
LITHOPHANE
LAMP
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
Documentation
20260522_164449.jpg
2.10MB
20260522_164638.jpg
1.93MB
20260522_172841.jpg
2.14MB
20260524_175550.jpg
2.04MB
20260524_180219.jpg
2.20MB
20260524_180241.jpg
2.03MB
View All