2026-01-12 20:35:53
233
10
Laptop Holder Clamp
@Jezzafool_4700713
Donate
Message
Follow
Recommended printing method
Add
Laptop Desk Clamp
Kobra S1
Kobra 3
、
Kobra 2
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 2h16m
0
Share
Description
I've designed these to hold my laptop at the side of my desk whilst using an external monitor etc. The 'teeth' are separate so that they can be printed in TPU and then glued.
The lower bracket is designed to be glued in place once the sliding lower jaw has been slotted in, although I've used it without doing this and it worked ok.
I printed with 25% infill and the X-Y Hole Compensation at 0.1 and X-Y Contour Compensation at -0.1. Also I found it to be better to print the threaded rod horizontally.
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
