Led Fan Lamp

Led Fan Lamp is a table lamp with 16 blades arranged around a cylindrical lampshade, tilting by 25 degrees as they rise. Assembled dimensions: Ø 130 mm at the widest point, 70 mm total height.

Circular LED fitting: Ø 59 × 8 mm.

Parts to print

- Fan lampshade — print upright, as oriented, without supports.

- Lid — Ø 63 mm, fits into the recess at the top of the lampshade.

Print settings

- Nozzle: 0.4 mm · Layer height: 0.2 mm · Material: PLA

- Infill: any setting.

- Supports: none.

What you need besides the printed parts

- LED Ø 59 × 8 mm, 5 V USB Kit. It press-fits into the pocket at the bottom of the lampshade: no screws or glue required.

- USB power adapter.

Assembly

1. Insert the LED into the cylinder from the top and slide it down into its seat. Gently press it beneath the 0.6 mm retaining tabs. Route the cable out of the bottom compartment through the arched opening in the lampshade wall, between two blades.

2. Fit the lid into the recess at the top.