Length Adjustable Drawer Handle
This is a drawer handle that can be adjusted the length easily in the slicer. it has preset M4 thread, which is the screw size used by most handles. The inside length of the thread is 12mm. There are 2 parts, you can break it first in the slicer, then move 1 part directly to shorten the length, until it meets the screw hole distance of your need, then combine or group them again and slice, and you can have a complete handle again. The original screw hole distance length is 128mm, which is just my bedside cupboard‘s size. You can scale it to a minimum length of 77mm, in the way I mentioned in the previous paragraph. Recommended printing setting: 0.1-0.2 layer height, 3-4 walls, 40-60% infill with grid pattern. STL and STP files are available, you can modify it yourself if you can do the modeling. Watch the video below to see how to adjust the length in the Slicer.
