0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2026-11-12 18:10:20
240
10
Report

Little Grocer | Pasta Box | Interactive Grocery

@Mike_stl_5441195
Message
Follow
Recommended printing method
Description

Little Grocer | Toy Farfalle Pasta Box


Add another pantry staple to Little Grocer with this 3D printable toy farfalle pasta box!

 

Designed to match the style of the original Little Grocer playset, the pasta box features the same simple shapes, cheerful colors and sturdy construction as the existing groceries and accessories. Its tall rounded box shape, removable lid and simplified farfalle icon make the contents easy to recognize while keeping the design clean, playful and easy to print. Unlike the other boxed groceries, this one can actually be opened and filled with the included oversized farfalle pieces. This makes it especially fun for pretend shopping while also allowing the pasta to cross over naturally into the Little Chef playset, where the pieces can be placed into a pot and used for pretend cooking. The pasta box is part of the growing Little Grocer collection, with more groceries, pantry products and store accessories planned to continue expanding the little supermarket.

 


 

Part of Little Grocer


This model was designed specifically to complement the original Little Grocer Grocery Store Pretend Playset and its expanding collection of groceries and accessories. Add it to the supermarket shelves alongside the existing cereal, rice, coffee, tea and other boxed products to give little shopkeepers another familiar grocery to stock, choose, place in their shopping basket and scan at the checkout. The removable lid also makes the box functional rather than purely decorative, allowing the pasta pieces to be stored inside between play sessions.


Compatible with Little Chef


The included farfalle pieces have been designed to work not only as groceries inside Little Grocer, but also as pretend ingredients for Little Chef.

Take the pasta out of the box, place it into a Little Chef pot and use it for pretend boiling, stirring, serving and cooking play. This helps connect the supermarket and kitchen playsets together, allowing ingredients to move naturally from shopping to cooking.


Community Feedback


Little Grocer is an ongoing project, and community suggestions help determine what will be added next. If there is another pantry product, cooking ingredient or store accessory you would like to see added, feel free to leave a comment.

 

 

 

Designed with Safety in Mind


Just like the original Little Grocer set, the pasta box and farfalle pieces have been designed with children in mind. The model uses simple, sturdy geometry and avoids unnecessarily thin or delicate details wherever possible. The pasta pieces are deliberately oversized compared with real farfalle, helping keep them sturdy and easier for small hands to handle during pretend play. This model contains embedded magnets, which require additional care during printing, assembly and use. Always make sure the magnets remain completely enclosed inside the printed parts. Inspect the model regularly for cracks, damage or exposed magnets, and discontinue use immediately if a magnet becomes accessible. Magnets can be extremely dangerous if swallowed. Adult supervision is strongly recommended, especially for younger children. Please use your own judgment regarding the suitability of this model for your child.

 

 

 

Printing & Magnet Installation


The pasta box and removable lid use embedded magnets to help the lid stay securely in place during play.


The model requires a total of four round 8 × 2 mm magnets:

  • 2 magnets inside the pasta box
  • 2 magnets inside the removable lid


Pauses have already been included at the correct layers in the supplied print profile. When the printer pauses, carefully place the magnets into their designated slots before resuming the print. The remaining layers will then print over the magnets, permanently enclosing them inside the parts. Make sure to check the magnet orientation before inserting them. The magnets in the lid must attract the corresponding magnets in the box. It is strongly recommended to test the polarity beforehand and keep the orientation consistent during installation. When inserting each magnet, it is also recommended to place a second magnet on the outside of the printed part, directly opposite the embedded magnet. This temporarily holds the inserted magnet firmly against the bottom of its pocket while printing resumes. This is especially useful because the metal printer nozzle or other nearby components can otherwise attract the loose magnet and cause it to lift out of the slot during printing. Once enough layers have been printed over the embedded magnet to secure it in place, the temporary external magnet can be removed. Take care when resuming the print and make sure all inserted magnets are sitting completely flat inside their pockets before continuing.

 

 

 

Printing Notes


The pasta box has been designed with ease of printing in mind and requires little to no support material. Its simple box construction, removable lid and bold farfalle label are well suited to multicolor printing, while the limited number of large graphic details helps keep the finished model clean and consistent with the rest of the Little Grocer collection. The included pasta pieces use a chunky, reinforced farfalle shape designed to remain sturdy during everyday pretend play while still being immediately recognizable as bow-tie pasta.

 

 

 

I hope you and your little shopkeepers enjoy taking Little Grocer from the supermarket shelf all the way into the Little Chef kitchen!

Tags
little grocer
montessori toy
montessori playset
supermarket toy
supermarket playset
grocery store toy
pretend play
kitchen toy
pretend shopping
cooking toy
imaginative play
kitchen play
play kitchen
toy kitchen
toy food
robust toy
pasta box
pasta toy
farfalle pasta
interactive toy
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.