2024-09-27 05:04:34
302
30
Locking Caliper Cap (15cm)
@JohnnyNorre_983122
Donate
Message
Follow
Recommended printing method
Add
Standard setting - 0.2mm
Kobra 3
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 11m
10
Share
Description
Cheap Chinese plastic calipers that turns on automatically has a tendency to turn by itself when it is placed in a drawer. For that reason I designed this cap, that fixates the jaws of the caliper in place, so it can't move and hence can not turn on by itself. This cap is for a larger 150mm caliper - the jaws measure 28mm in width and approx. 34mm in height. Here printed in generic black PLA on an A1 Mini.
NOTE: I have added a version 2 of this cap (caliper_cap-Bodyv2.stl and red in the pictures) which is a little shorter, so it fits calipers which has a little shorter jaw height than 34mm. The new one is 33mm and I recommend you use this instead of the original!
See also my Locking Caliper Cap (10cm) for a smaller Chinese caliper.
Tags
License
Comments & Ratings
Here is empty
Remixes
