0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2025-08-20 04:39:59
438
0
Report

Locking Mechanism for a Leifheit Drying Rack (Wäscheständer / Standwäschespinne)

@Bohnwani_2945083
Message
Follow
Description

This design is from the printables user @NorbertHarrer_928066 - have been looking for this part for a long time.


For disassembly, drill out the rivet on the middle pin (see Picture 2). You can also use a pair of pliers and pitch the end rivet as the metal is soft. Once the rivet is removed, you can take out the pin, and the entire top plastic part will come off.

Next, carefully cut off the broken part exactly 5mm above the hole (see Picture 3).

Print the replacement part, ensuring it includes support (I used PETG with grid support). The replacement part should fit into the original part. Since the holes align, gluing them together is optional but not required.


Best replace the metal pin with a M5x70 screw and a self locking M5 nut.


Tags
leifheit
clothesrack
clothes
locking
License