M.T.H.S. - Backplate - Ikea Skadis
Description
This is an initial test build published to solicit feedback for improvement.
Design Concept:
A series of tool and accessory holders that can be attached to modular mount plates for various brands track / wall systems, or mounted directly to the wall.
Printing Instructions:
The minimum tested infill for most parts was 10% grid pattern with 3 wall loops using PLA+ filament. 15-20% infill is recommended for better durability, or performing selective reinforcement of key areas (hooks, fingers, etc.) during slicing. PLA+ works for most of the tool holders for light duty, but PETG is recommended.
Assembly:
The series is designed to use M4 screws and nuts, with a M4x16mm being used for most of the modules in the series.
Specifically ISO7380 Button Head M4 -0.7 x 16mm or M4 - 0.7 x 12mm screws were used for the design.
Other M4 screw head types should generally work as well, but they may required the use of a washer depending on how they sit in the recessed area of the tool plates.
The M4x16mm screws that I personally am using are made by IEXCELL and can be found on Amazon.
Revision 1 - Prototype. Added labeling to model(s) to be able to distinguish the different revisions.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
