Matrix,Trinity,Neo

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 206.19x250mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.7mm

Filaments Used:PLA Kingroon Black Transmission Distance: 0.4PLA+ Numakers Fluorescent Green Transmission Distance: 6.4PLA PolyLite White Transmission Distance: 5This print uses 3 unique filaments

Swap Instructions:Start with BlackAt layer #8 (0.72mm) swap to Fluorescent GreenAt layer #15 (1.28mm) swap to White for the rest.