0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2026-08-04 04:01:02
453
2
Report

Mercusys Halo H3000X Wall Mount - Snap-fit for 90x90mm Surface Socket

@XeeseMaster_2746731
Message
Follow
Recommended printing method
Description

Elevate your Mercusys Halo H3000X mesh router with this custom-designed wall mount. This 3D-printable bracket allows you to neatly install your router directly onto a standard 90x90mm surface-mounted electrical socket, as shown in the reference images.

Key Features:

  • Perfect Fit: Specifically designed to securely snap-fit onto the frame of a 90x90mm surface socket (Type F / Schuko style). No screws or drilling into the wall are required for installation.
  • Integrated Power Management: The mount includes a dedicated lower shelf to hold the power adapter brick securely, keeping it off the floor and organized.
  • Clean Setup: Routes the power cable cleanly from the adapter to the router, minimizing tangles and exposed wires.
  • Optimal Placement: Mounts the router high on the wall for better Wi-Fi coverage throughout your home.
  • Sturdy Design: Engineered with a strong, functional shelf to support the weight of the Halo H3000X.

Compatibility:

  • Fits the Mercusys Halo H3000X router unit.
  • Snaps onto standard 90x90mm surface-mounted Schuko power sockets. Please check your socket dimensions before printing.


Printing Recommendations:

  • Material: PLA+ or PETG are recommended for strength and durability.
  • Infill: 20% or higher for structural integrity.
  • Supports: Designed to be printable without supports. Ensure your printer has good bridging capabilities for the cable pass-through areas.
  • Print with the flat back face on the build plate.


Installation:

  1. Unplug the socket's faceplate if necessary to confirm fitment.
  2. Slide the 3D-printed mount over the existing surface socket housing until it snaps securely into place.
  3. Place the power adapter on the lower shelf.
  4. Connect the cable to the Mercusys Halo H3000X and set the router on the main upper shelf.

Enjoy a clutter-free and optimized Wi-Fi setup!

Tags
Wi-Fi Router Mount
Mercusys Halo H3000X
Halo H3000X
Mercusys
Mesh Mount
Wall Mount
90x90 Socket
License