MicroDrone 2s 3D printed Frame

Two protoypes 3d printed frames for a 2s micro drone.

Both fly very well nonetheless.

Beware that the ducts will not survive a hard hit.

I used these parts:

FC+4in1ESC stack - https://bit.ly/2PzYlyR

Fpv Camera + VTX AIO: Link

0705-12000kv motors

55mm propellers

Tested in ASA, PETG, PC and PETG-CF. The last one gives has better rigidity. All of them break or bend badly with a enought big hit.