Mimikyu - LED Lightbox

Mimikyu - Printing Instructions Included

All the necessary printing instructions are included in the file.

If you have any questions, feel free to DM me!

You will need a 1mm thick glass layer or any transparent material of your choice.

Also, make sure to have a strip light of your choice for the lighting.

For Commercial Use & More: https://www.patreon.com/c/ACSPARK3D

Enjoy showcasing your Mimikyu lightbox!

Note to always put the transparent layer last

LightBox Frame Settings:

Layer Height: 0.2

Walls: 2

Bottom: 2 (Or 3 to hide infil lines)

Top: 2

15% Infil

LightBox Back Plate Settings:

Layer Height: 0.2

Walls: 2

Bottom: 3

Top: 3

10% Infil

LightBox Transparent Layer:

Layer Height: 0.2

Walls: 2

Bottom: 2

Top: 2

1% Infil

Design Layer Settings:

Layer Height: 0.2

2 Walls

2 Top/Bottom

3% Infil

No supports.