Mini Power Armor Chibi Fallout Vault-Tec

Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.

You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.



Straight from the radioactive ruins of the wasteland comes this Chibi Power Armor, a Fallout-inspired take on the most iconic piece of post-apocalyptic technology ever created.

This model blends heavy military armor design with cute chibi proportions, resulting in a figure that looks both adorable and indestructible — like a Vault Dweller ready to stomp through the ruins with a smile hidden behind reinforced steel.

Designed for FDM 3D printing, the model features thick, clean details and is optimized for reliable printing on home machines.

🛡️ Included Versions

🔹 Normal Version

A clean and intact Power Armor suit, fresh from the armory. Perfect for pristine display pieces, collectors, or custom paint jobs with faction colors.

🔹 Battle Damaged Version

Scarred by the wasteland — cracked plates, worn edges, and combat damage tell the story of countless firefights and hard survival. Ideal for gritty dioramas and weathered paint schemes.

   Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT

2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.
•  
•  
• Recommendations:
• 
  
•  
• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
•  
• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.
•  
• Clean the plate thoroughly before printing.
• Make sure the filament is dry and free from dirt. This can damage the print or weaken the support