Minion Figure With Storage

A fun Minion model with inbuilt storage. There is a Drawer in the stomach and the eye is a removable tube with a screw top.

Store pens, pencils, coins, sweets..... you decide!

You can also hang items on the arms, such as a watch. The gaps between the fingers can be used to hold pens/pencils (depending on size) or again things can be hung on the fingers/hands.

The arms and the handle for the drawer will need to be glued in place (There are indents to aid in this. Rotate the arms until they fit flush with the body). I used superglue for this and it works well.

I have printed this model on the Anycubic Kobra 3 Combo at 0.2 layer height, default profile, at standard speed.

I set the purge amount to 1 and there is minimal colour bleeding.

I printed the main body with auto tree supports which resulted in no supports inside the draw cavity and minimal support in the eye 'socket'. This resulted in some clean up of the bridging which can be done with a heat gun or gas torch.

if you want a cleaner print on the inside cavities I recommend enabling everywhere supports and manually adding supports into those areas.

I hope that you enjoy this design!