Muddable J Bead for 5/8 in Drywall

When installing 5/8ths inch drywall for a home sound studio I found that the nearest J Bead that would fit was only available on the far side of the country and not available for shipping.

This was designed to be a next best (and available) option.

The model can be resized to maximize the print volume your printer can handle.

Due to stresses on the materials installed, I recommend printing the J Bead on it's side with the longest dimension upwards.

If you're using a bed slinger, I do not recommend printing at full speed as the model will often tear free from the bed in the latter ¼ of the print.