Multiboard Compatible Screw Basket

A simple storage container compatible with Multiboard. This is an easy to print model that takes about 1.5 hours on the Kobra S1. The model also uses 35g of filament including support material.

As pictured, this is the same size as the BoboVR Quest 3 Battery.

This will require the use of the Multiboard compatible 3d printed screws which are linked below. You will need 2 screws for this model.

https://thangs.com/designer/Multiboard/3d-model/9%20mm%20Small%20Thread%2C%20Small%20Thread%20Head%2C%20Bolt-974141

Printer Settings:

0.2mm Layer Height

15% Infill

Support Material Auto Generated