0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2025-08-25 01:16:51
238
11
Report

Mystic dog HueForge

@fD667_1053716
Message
Follow
Recommended printing method
Description

Picture source - author: Joane Dickson 

Then used HueForge v0.9.0 to create the model.


Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.

Model size is 150x150mm. You can only modify the X and Y dimensions. Do not adjust the height (Z) in your slicer! The layers would not be correct. You may print at higher layer heights below the Min Depth of 0.56mm. The Max Depth is 2.16mm and the Actual Depth is 2.16mm.

 

It is possible to print without material system by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support.

 

These were my settings and colors for my print that you see in the picture. Your results may be depending on the filament you use.

Filaments Used:

  PLA Anycubic Black Transmission Distance: 0.3

    PLA BambuLab Basic Blue Gray Transmission Distance: 3

    PLA BambuLab Matte Ice Blue Transmission Distance: 3.5

    PLA Elegoo Basic White Transmission Distance: 7

This print uses 4 unique filaments


Swap Instructions:

    Start with Black

    At layer #10 (0.88mm) swap to Blue Gray

    At layer #14 (1.2mm) swap to Ice Blue

    At layer #20 (1.68mm) swap to White for the rest.

Tags
dog
water
mystic
fantasy
decoration
decor
3dart
art
wallart
walldecor
homedecor
wall decor
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.