Nativity - Christmas Bookmark

If you want to sell prints of this model, as well as all of my models - future and past

Subscribe to My Patreon: https://www.patreon.com/c/chromac3d/membership

Nativity is a detailed Christmas bookmark featuring a serene Nativity scene, perfect for adding warmth and meaning to winter reading. 🌟

This design shows the Holy Family gathered around the newborn child in a rustic wooden stable, framed by beams, stone textures, and a softly glowing night sky. 🕯️ The animals resting below add a gentle storytelling layer, making the whole piece feel like a tiny illustrated icon that lives between the pages of a book. 🐑

The bookmark is tall and elegant, with a decorative top and bottom that help it stand out while still sliding easily into most books. Its raised details are designed specifically for color changes at different layers.

Maker notes:

• While the included profiles are carefully optimized for a 0.4 mm nozzle to retain detail across different settings, this model is still best printed with a 0.2 mm nozzle for the sharpest ribs, phalanges, and frame curls 🧩🖨️
•  
• Make sure to clean the build plate with dishwashing soap and warm water before printing. Handwashing soaps should never be used to clean build plates because moisturizers can harm adhesion 🧼💧
•  

USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA KINGROON Black Transmission Distance: 0.4 / Amazon

PLA KINGROON Dark Gray Transmission Distance: 1.7 / Amazon

PLA KINGROON Brown Transmission Distance: 3.3 / Amazon

PLA+ Jayo White Transmission Distance: 7.7 / Amazon

Color Pallete:

Swap Instructions:

Start with Black

    At layer #10 (0.89mm) swap to Dark Gray

    At layer #13 (1.13mm) swap to Brown

    At layer #16 (1.37mm) swap to White for the rest.