0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2024-12-24 04:02:40
726
17
Report

NetAlly LinkSprinter LS300 hard case

@Hipolite_3615730
Message
Follow
Description

A hard case for the NetAlly LinkSprinter LS300 Pocket Network Tester. I bought mine used so it didn't come with the soft protective cover. I hope to improve on the original soft cover by including a space to store the two AA batteries outside of the LinkSprinter which will eliminate the risk of them leaking inside and corroding the electronics.

Assembled case dimensions: x: 58mm y: 160mm z: 38mm

The photos show the actual printed parts in eSUN PLA+ (Peak Green):

  • 0.4mm nozzle
  • 0.2mm layer height
  • 3 Perimeters
  • 20% Inflill
  • Supports: No.

 

Parts required for assembly:

  • Print 1x Base
  • Print 1x Top
  • Print 1x Clip
  • 3x 5mm x 50mm bolts and nuts - 1x for the hinge and 2x for the clip. I recommend locking nuts or thread locking glue so they don't loosen when hinging the case open and closed.


License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.