2025-11-18 09:14:30
1.6k
163
Nimitz-Class Aircraft Carrier尼米兹级航母
@TianMenProgram_3678690
Donate
Message
Follow
Recommended printing method
Add
尼米兹级航母
Kobra S1
Kobra 3
、
Kobra 2
、
Kobra 2 Plus
、
Kobra 2 Neo
、
Kobra 2 Pro
、
Kobra 2 Max
、
Kobra 3 Max
、
Kobra 3 V2
、
Kobra X
/ Plates:1
/ 1h40m
33
Share
Description
Nimitz-Class Aircraft Carrier
Remember to clean the PEI build plate before printing to ensure good adhesion, and make sure the filament is dry.
The model uses about 40g of material and takes approximately 2 hours and 16 minutes to print.
Recommended settings: PLA, 0.12mm layer height, 2 wall loops, and all acceleration values at 1000 or below.
尼米兹级航母
打印前记得清洁好PEI打印板，保证其粘度OK，确保材料干燥
模型用料40克，时长2小时16分。
PLA，0.12层高，2层墙，加速度全部1000或以下。
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
Comments & Ratings
Here is empty
Remixes
