0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2024-10-08 12:33:39
2.2k
184
Report

Noodle Dispenser, modular, wall mounted

@CosmicNimbus_5041130
Message
Follow
Recommended printing method
Description

Patreon - https://patreon.com/CosmicNimbusPrinting

Cults3D - https://cults3d.com/en/users/CosmicNimbus


Hi there!


I created a modular noodle dispenser that you can add to your wall and expand as you need. The interior dimensions are 130mm x 140mm to make space for large noodle packets. You can print each dispenser in parts, or whole pieces and connect them together.


They clip together nice and strong with 0.1mm tolerances. Make sure you stack them with support from the bottom, or stick them to the wall with double sided tape like I have.


I've printed mine in PETG and PLA, and they seem to work well as the walls are quite strong. There are holes in them if you want to screw them to the wall, plenty of space for some strong double sided tape / command strips, or with a small adjustment of the model it could work well with suction cups as well.


I played around with printing this on different angles to make the clips stronger. But in the end, i found printing in this orientation is the simplest solution besides designing it differently

 

Notes on the prints in the pictures:

White: PETG - there are lines as I slowed speed, then switched Filament brand halfway through

Green: PLA bambu lab basic. Printed the cleanest !

Red: PETG HF - I didn't dry this filament first as you are supposed to, so it didn't print super clean

Be gentle with the clips, as they can break off because of the way the layer lines are on this print


NOTE: Purchasing this model includes a Personal License so you can print this for personal use.

If you'd like to print and sell this model yourself, you can sign up for a Vendor License over at my Patreon page

https://patreon.com/CosmicNimbusPrinting


At no point are you allowed to distribute or sell my model files

I think it's fair that I retain the rights to the model files that I create


Thanks for checking out my models !

Cosmic Nimbus

Tags
WallHangingDispenser
NoodleDispenser
PastaDispenser
WallMountedTool
KitchenOrganization
NoodleStorage
WallMountedDispenser
SpaceSavingGadget
UniqueKitchenTool
FoodDispenser
CookingTools
Pantry
WallMountedStorage
KitchenGadget
NoodleHolder
MealPrepTool
OrganizedKitchen
License