0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2024-05-24 03:23:58
10k
783
Report

Oldman birdhouse

@Byambaa_1225235
Message
Follow
Recommended printing method
Description

An old mountain-man themed birdhouse. Meant to be hanged (to be cleaned after each season) and has a drainage hole, as well as ventilation holes on the front, side and at the top. The pipe is the feeder. The model itself does not require supports (and not pre-supported either) and can be printed in multi-color in a single print. Parts can be removed (if you feel you don't need) and won't affect the main model, for example you can remove leafs, the mushroom or the bottom branches and the remaining model still retains the full finish (unfinished surface won't appear in place).

I had the full 3D printability in mind from start to finish, so there shouldn't emerge any print related problems. And because I don't own a multicolor 3D printer, I could not test it by myself, so for this reason I call this version 0.9, I will fix the reported problems (if there is any) and provide support for the coming days, so please don't hesitate to give feedback. I will release the single mesh version later (for single color printers).

Tags
Birdhouse
Bird house
Oldman
Multicolor
No support
Garden
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.