PTFE Organizer

This is an extremely lightweight part that 4 PTFE tubes go inside from the ACE Pro to a hub.

• PTFE tubes freely twist and turn.
• Anchors into position on the PTFE tubes by securing to other same parts on the PTFE tubes via thread.
• Supports ACE Pro buffer extension via two units secured around a 90 degree bend of the PTFE tubes.
• Thread or Filament can be used to tie each part to the previous, next, the PTFE hub or the ACE Pro buffer plate.
• Extremely light but has the required strength.
• Choose the size that slides easily on the PTFE tubes. No constriction means no force on the filament.

这是一个极其轻巧的部件，由 4 根 PTFE 管从 ACE Pro 内部连接到轮毂。

PTFE 管可自由旋转。

通过螺纹将其固定在 PTFE 管上的其他相同部件上，从而将其固定在 PTFE 管上。

通过两个固定在 PTFE 管 90 度弯头上的单元支撑 ACE Pro 缓冲器延伸部分。

可以使用线或细丝将每个部件连接到前一个、下一个 PTFE 轮毂或 ACE Pro 缓冲板。

极其轻巧，但具有所需的强度。