Paint it Black
The design is an open paint can, tilted at a 15 degree angle with some black paint spilling out, There is a paint brush floating, suspended in mid air with paint dripping off the brush. Can, paint, and brush appear to frozen in time.
The paint can is a standard quart size, and with the model put together it stands slightly under 18inches. Pieces fit snugly together, so be sure your printer is calibrated. I am still in debate about keeping the paint can open as a storage container.
The paint can label was designed in Microsoft PowerPoint, printed out on basic paper then glued on the plastic can.
As this is my first full model designed in Fusion360, I am posting the virtual model on thingiverse.com so anyone who wants, could print it for free.
The 3D printing community has given me a lot and I am more than happy to contribute back.
Paint brush parts should be printed out with minimal infill (6%) to help maintain balance of the model.
The Paint splash should be printed out with heavy infill (45%) once again to help balance the model
When printing out the brush bristles part, I adjusted the flow rates up and down ( 95% to 110%) to accentuate the layer lines and create a brush effect.
For a better understanding of how to print out this model look at https://www.thingiverse.com/thing:3617536
Any questions please send me a message and I will try and help.
You can follow me on instagram, https://www.instagram.com/pla.n.pa/
to find out what I designs I am currently working on
If your interested in selling prints of my designs, become a Patreon supporter here…
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
