0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2025-11-16 01:37:02
227
13
Report

Panda II. HueForge

@fD667_1053716
Message
Follow
Recommended printing method
Description

Picture source/author: Kathryn Diane Nicholson Booth

Then used HueForge v0.9.3 to create the model.

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.

Do not adjust the height (Z) in your slicer! The layers would not be correct. You can only modify the X and Y dimensions. You may print at higher layer heights below the Min Depth of 0.48mm. The Max Depth is 2.24mm and the Actual Depth is 2.24mm.


It is possible to print without material system by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support.

 

Filaments Used:

PLA Anycubic Black Transmission Distance: 0.3

PLA Sunlu Meta Grey Transmission Distance: 3.5

PLA Elegoo Basic White Transmission Distance: 7

This print uses 3 unique filaments


Swap Instructions:

Start with Black

At layer #9 (0.8mm) swap to Grey

At layer #14 (1.2mm) swap to White for the rest.

Tags
panda
bamboo
hueforge
decoration
decor
3dart
3d
wallart
walldecor
home
homedecor
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.