Perfect Support Test! Easy to remove!

Do you desire flawless support for your model every time? If so, you should try this Support Test to help you fine-tune your support settings!

This test is most effective if you have an Ace Pro or (AMS), as it utilizes both PLA and PETG filaments. This combination makes it incredibly easy to remove the support, resulting in a flawless top layer for your model. PLA and PETG are incompatible, so they won’t melt together. 

Guide:

• Select your printer and filaments. (I'm using an Anycubic Kobra S1 Ace Pro Combo)
• One of the filaments should be PLA and one should be PETG. (I'm using Anycubic PLA and Anycubic PETG)
• Select your preferred printing profile. For example "0.16mm Standard" or "0.20mm Standard".
• Under support settings, make sure to pick "Support/raft interface" as the opposite filament. If you want to print the model in PLA, the support/raft interface setting should be PETG, and vice verse.
• Slice and print!
• When the printer is done, pick the one you like the most (easy to remove, best surface etc.), and add those values to your printing profile!