2024-09-15 02:16:54
3.7k
463
PocketDriver - EDC Hex Bit Screwdriver w/ Storage
@DownloadedGoods_3663570
Donate
Message
Follow
Recommended printing method
+ Frequently Used Printer
More profile
153
Share
Description
The PocketDriver is a sleek and practical EDC bit driver designed to hold up to 4 bits within its body.
It comes in 2 versions, a Large (can carry up to 4 bits) and a Medium (can carry up to 3 bits). Printing it is super easy, just make sure to have a brim and good bed adhesion so that the body doesn't fall mid-print.
At the base of the bit socket, there's room to affix a 6x2mm round magnet (a 5x1mm magnet also works). The model features 0.3mm tolerances for the bits, though depending on your printer and material, it may be slightly snug. If needed, using pliers to insert and remove bits a few times can help loosen the slot.
Happy printing!
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
Comments & Ratings
Here is empty
Remixes
