2026-04-14 08:08:15
5.1k
669
Poop Shooter Kobra X
@3DPrinter_5446284
Donate
Message
Follow
Recommended printing method
Add
PoopBracketX
Kobra X
Kobra 3
、
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 14m
73
Share
Description
This is very simple and effective model that deflect the poop of a Kobra X printer down so it goes into a Poop Bin instead of all over.
Uses only 2.85g of material. Prints in 10 minutes.
2walls 15% infill. Any material should work
Remove the existing screw on the bottom of the filament purge module.
Attach this mode and reinsert the screw. Done.
Poop Bin compatible with the Kobra X is here
https://www.makeronline.com/en/model/Kobra%20X%20poop%20Box%20Small/286842.html?trackModuleType=10
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
