2026-08-06 22:50:40
948
69
Print In Place Case
@FreshPrints_1461742
Donate
Message
Follow
Recommended printing method
Add
Print In Place Case
Kobra X
Kobra 3
、
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:3
/ 11h2m
Ford Bronco Case
Kobra X
Kobra 3
、
Kobra S1
、
Kobra 4
、
Kobra 3 V2
、
Kobra 3 Max
/ Plates:1
/ 3h9m
13
Share
Description
The case prints as a single assembled part, so there are no pins, screws, or assembly required. Remove it from the build plate, free the hinge if needed, and it’s ready to use. Multiple sizes agailable. If you need a different size let me know!
aPrinting Recommendations
Layer Height: 0.20 mm
Wall Count: 2–4
Infill: 15–20%
Supports: None
Print the model in the provided orientation for the best print-in-place performance.
TipsAllow the print to cool before removing it from the build plate.
If the hinge is tight after printing, gently work it back and forth a few times until it moves freely.
PLA, PETG, and ASA all work well depending on your intended use.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
