Hello everyone! My two boys wanted to try mini golf. Since there wasn't one nearby, I embarked on the project of creating one. After a few hours on Fusion 360, I made a putter, a ball, and a finishing point.
The goal is to play and hit gently. No need to be an expert. I made a clip system for the shaft so I could print it on the Kobra3. If you have a better idea, please let me know; I can modify it if necessary.
Print everything in PLA. I added a thread for the lower part.
I printed the "iron" without support.
At 0.16 layers.
Infill 25% Gyroid.
For the shaft, I printed it vertically with a border for the support as well as for the inside of the square (the part that fits together).
At 0.16 layers. 5 Shells
25% Gyroid filling
For the ball I also recommend a support. At layer 0.16
For the final hole, no support is needed, 10% Gyroid filling, At Layer 0.2
on the Kobra 3.
I made it in one color, but it's entirely possible to make it in multiple colors and add a name to the outside of the iron, so your child will be proud of their goal!
I can do it for you if you can't manage it, don't hesitate to contact me directly.
For the threading, your machine must be very well adjusted, otherwise you may have difficulty screwing it in. Otherwise, it's a 9mm diameter thread. If you have a screw to work it in once before inserting the handle, that might help.
It's entirely possible to add obstacles to make your games more intense and fun, using everyday objects like empty reels or cardboard boxes, or children's toys lying around.
Let your imagination run wild and have fun with the family!
Remember, this is designed to be hit gently, and don't try to hurt anyone.
french :
Bonjour à tous ! mes deux garçons ont voulu essayer de le mini golf, n'ayant pas de mini golf à proximité je me suis lancé dans le projet de le créer, et voilà après quelques heures sur Fusion 360 , j'ai fait un putter, une balle et un point final.
Le but est de jouer et frapper doucement, pas besoin d'être une , j'ai fait un système de clips pour le manche pour pouvoir l'imprimer sur la kobra3, si vous avez une meilleure idée n'hésitez pas à m'en faire part, je peux modifier au besoin.
Tout imprimer en PLA, j'ai mis un filetage pour la partie basse.
Le "fer" je l'ai imprimé sans support.
En couche de 0,16.
Remplissage 25% gyroid
Pour le manche, je l'ai imprimé verticalement avec une bordure pour le support ainsi que pour l'intérieur du carré ( la partie qui semboîte)
En couche de 0,16. avec 5 coques.
Remplissage 25% gyroid
Pour la balle je vous recommande un support également.
Pour le trou final , pas besoin de support , remplissage 10% Gyroid
sur la kobra 3.
Je l'ai fait en mono couleur, mais il est tout à fait possible de faire en multi couleur et d'ajouter un prénom sur la partie extérieure du fer, pour que votre enfant soit fier de son but !
Je peux vous le faire si vous n'y arrivez pas, n'hésitez pas à me contacter directement.
Pour le filetage, faut que votre machine soit très bien réglée sinon vous risquez d'avoir du mal à visser, sinon c'est un filetage de 9mm de diamètre. Si vous avez une vis pour le faire travailler 1 fois avant d'insérer le manche, ça peut aider.
Il est tout à fait possible de rajouter des obstacles pour rendre vos parties plus intenses et plus drôles, avec des objets du quotidien, des bobines vides ou des cartons de Pla par exemple, ou des jouets des enfants qui traînent.
Laissez libre cours à votre imagination et amusez-vous en famille !
N'oubliez pas, c'est fait pour taper doucement et ne vous amusez pas à faire du mal.
